An interview with Russ White, CCIE No. 2635, a member of the Routing Protocol Design and Architecture Team at Cisco Systems. In this interview he presents valuable insights into CCDE Design Track Certification.

Popularity: 12% [?]

Popularity: 12% [?]

This is how to add a DNS Server to Solaris Box…
First of all, Open up your favourite text editor and add the name servers into /etc/resolv.conf
nameserver 192.168.1.1
If you need to add more, just add another one in the next line…
Following the instructions below will walk you through the process…
bash-3.00# ping www.google.com
ping: unknown host www.google.com
bash-3.00# cat [...]

Popularity: 12% [?]

Adding IP address and default gateway is rather straight forward as long as the interface is loaded. To see whether the interface is loaded, issue the command ifconfig –a
You should see something like the following…

bash-3.00# ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
rtls0: flags=1000842<BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
inet 0.0.0.0 netmask 0
ether 0:6:4f:47:76:1e

In this [...]

Popularity: 15% [?]

When a Name Server looks up a domain for the IP address, it stores the information into the cache so it doesn’t have to look it up every single time a request is made. For example, if someone looks for www.nishv.com the DNS server will look up the domain and stores the IP address 72.52.178.35 [...]

Popularity: 5% [?]